4K UHD Send UHD 4K signals from a set top box, media player, or other video source to another room up to 50m away over an ethernet Cat6 cable. Ideal for Pay TV, home theatre systems, meeting rooms, or to connect a computer to a display that's not in close proximity.
Supports the latest standards including HDCP 2.2 and High Dynamic Range (HDR). There is an HDMI loop output on the transmitter, and the EDID (Extended Display Identification Data) can be switched to copy either the source or output device. Use your remote control on the receiver end for full control of your devices using the integrated infrared extender.
Power is sent to the receiver over the Cat cable, and the infrared emitter and receiver each have short leads so you can mount the main units out of view.
Note: Distance will be reduced to about 40m using Cat5e cable.
Features: - Up to 4K x 2K Video Resolution - High-Dynamic-Range (HDR) Video Support - Integrated Remote Control Extender - Up to 50m (Cat6), 40m (Cat5e)
Product Specifications
- Digital Audio Format : LPCM, Dolby TrueHD, DTS-HD Master Audio 5.1, DTS-HD Master Audio 7.1, Dolby Digital/Plus/Ex, Dolby Atmos, DTS-X
- Width : 102.0mm
- Height : 14.0mm
- Depth : 70.0mm
- PSU Powers : Main Product
- DC Plugpack Voltage : 12.0V
- DC Current Draw : 1000.0mA
- Supported Display Resolution : 4K UHD (3840 x 2160)
- Resolution Frequency : 30.0Hz, 60.0Hz
- HDMI Version : 2.0b
- HDMI Maximum Data Rate : 18.0Gb/s
- HDMI Maximum Colour Depth : 8.0b
- HDCP Version : 2.2, 1.4
- HDR Version : HDR 10
- Switcher/Converter Type : Balun Extender
- Input type : HDMI
- Input Connection : HDMI Type-A
- Number of inputs : 1.0pc
- Output Type : HDMI
- Output Connection : HDMI Type-A
- Number of Outputs : 1.0pc
- Maximum Output Cable Length : 50.0m
- Power Requirement : External Power Required
- Remote Control : Infra-red (IR)
- Signal Type : HDMI
- Input Connection : HDMI Type-A
- Connecting Cable : Cat5e UTP, Cat6 UTP
- Connecting Cable Termination : RJ45
- Maximum Distance Between Baluns (cat5e) : 40.0m
- Maximum Distance Between Baluns (cat6) : 50.0m
- Number of Cables : 1.0pc
- Output Connection : HDMI Type-A
- Number of Outputs : 1.0pc
- Extender Type : Balun (UTP Cable)
- Signal Connection Type : 3.5mm Mono
- IR Signal Fequency Compatibility : 20.0kHz, 60.0kHz
- IR Input Location : Remote wired sensor
- IR Output Location : Remote wired emitter
- Length : 22.3 cm
- Width : 13 cm
- Height : 7 cm
